Select languageSpare parts for mills
Below is a list of finished products available at the warehouse of NBS TECHNOLOGY LLC. If you are interested in purchasing any item, please contact the head of the equipment department, Valery Vladislavovich Solonko (go to the "Contacts" page)
| № | Name | Qty., pcs. | Drawing № |
| I. Mill MShTs(MSHR) 3,6х4,0;4,5;5,0;5,5 | |||
| 1 | Drum body 3.6x4.0 | 1 | 0-119595SB |
| 2 | End wall of mill discharge 3,6х4,0 | 1 | 2-274758SB |
| 3 | Loading branch pipe | 1 | 3640.11.302 |
| 4 | Discharge funnel | 2 | 1-125529 |
| 5 | Funnel neck | 1 | 2-66397АА |
| 6 | L-shaped armor | 16 | OF-36-220M |
| 7 | Bearing foundation plate d.1350 | 2 | 1-117994 |
| 8 | Drum body MShR3.6x5.0 | 1 | 0-119324 |
| 9 | Pinion shaft m-20, z-26 | 8 | 2-165540 |
| 10 | Pinion shaft m-20, z-27 | 2 | 2-165541 |
| 11 | Toothed crown m-20, z-268 | 2 | 1-174343-03СБ |
| 12 | End wall unloading mill 3,6х5,0 | 3 | 2-212028СБ |
| III.Spare parts for MShR mills; MShTs 4.0x5.5 | |||
| 1 | Drive shaft foundation plate | 2 | 1-1117994 |
| 2 | Drum housing | 1 | 1-224437SB |
| 3 | Bearing support plate d.1700 | 2 | 1-179645 |
| 4 | Bearing caps d.1700 | 2 | _ |
| 5 | End wall (unloading) | 1 | 1-211377SB |
| 6 | Bearing housing support d.1700 for bolt without babbitt | 1 | 0-81846(0-73969) |
| 7 | Bearing housing thrust d.1700 for bolt without babbitt | 1 | 0-81847(0-73968) |
| 8 | Electric motor SDS 19-46-40 2000 kW | 1 | _ |
| 9 | Shaft in complete with h\w m-20, z-33 | 1 | 2-405145СБ |
| 10 | Toothed crown m-20, z-288 | 1 | 1-178326СБ |
| VI. Mill MMS 70x23 | |||
| 1 | Bearing caps left | 2 | 3Bu66.3702I1-0 |
| 2 | Bearing caps right | 2 | 3Bu66.3704I1-1 |
| 3 | Support plate | 2 | 3Vu79.38I2-8 |
| 4 | Foundation plate | 2 | 3B66.37-7 |
| 5 | Bearing housing for MMS 70x23 | 2 |
3Bu79.3804I1-0SB 3Bu79.3805I1-0SB |
| 6 | Mill MMS70x23 in full set | 2 | |
| 7 | Shaft | 1 | 3V79.17.10 |
| 8 | Gear | 1 | 3V79.17-9 |
| 9 | Shaft | 1 | 3Vu66.17-2 |
| 10 | Gear | 1 | 3Vu36.17-1 |
| 11 | Loading device assembly (hopper) | 1 | 3Vu79.32-0SB |
| 12 | Installation of drive gear: | ||
| Drive frame | 2 | 3А66.17-8 | |
| 13 | Flexible coupling with intermediate shaft | 1 | 3B79.43-0SB |
| 14 | Installation of ring gear casing | 1 | 3Bu79.18I1-0SB |
| 15 | Drum lifting device not complete (two jacks) | 1 | 3Bu36.56-0SB |
| 16 | Auxiliary drive | 1 | 3A79.55-0SB |
| 17 | Toothed wheel m-28, z-75 | 1 | 3V79.5503I1-0 |
| 18 | Installation of thick lubrication station | 1 | 5V582-0I2SB |
| 19 | Bearing foundation plate | 4 | 3B66.37-7 |
| VIII. Mill MMS 50x23 | |||
| 1 | Drum body | 1 | 3Bu82.0901-0SB |
| 2 | Unloading journal | 2 | 3B82.09-6 |
| 3 | Support plate + bearing cover | 2 | 3Аu84.37-0SB |
| 4 | Installation of drive gear | 1 | 3А84.17-0SB |
| Х. Spare parts for the mill MSC 2,7х3,6 | |||
| 1 | Loading cover (without lining) | 1 | |
| 2 | Discharge cover (without lining) | 1 | |
| 3 | Toothed crown (in two halves) | 1 | |
| 4 | Drive shaft with foundation plate | 1 | |
| 5 | Bucket feeder | 1 | |
| 6 | Support bearing assembled with foundation plate | 1 | |
| 7 | Thrust bearing assembled with foundation plate | 1 | |
| Spare parts | |||
| 1 | Non-driven conveyor drum 160x125x260 manufactured by SZTM | 1 | 2Bu53469.0SB |
| 2 | Non-driven conveyor drum 160x125x200 manufactured by SZTM | 2 | 2Bu52910.0SB |
| 3 | Plastic feeder PP 1-24-150, No. 1 | 1 | 1-24-150 |
| 4 | Plastic feeder PP 1-24-150, No. 2 (sprocket shaft, drive shaft) | 1 | 1-24-150 |
| 5 | Used rotor of electric motor SDS 19-46-40 2000 kW (without 13 poles) | 1 | SDS 19-46-40 2000 kW |
| 6 | Cover unloading mill | 1 | OF-I-59205 |
Developed by